900V 2 Poles PV Surge Protector , 40KA PV Surge Arrester For Solar Panel
OBV5-C40-PV
Prewired modular complete unit for use in photovoltaic systems consisting of a base part and plug-in protection modules
Combined disconnection and short-circuiting device with safe electrical isolation in the protection module prevents fire damage resulting from d.c. switching arcs (patented SCI principle)
Tried and tested fault-resistant Y circuit of the OBV6-C40-PV prevents damage to the surge protective device in case of insulation faults in the generator circuit.
Integrated d.c. fuse allows safe replacement of protection modules without arc formation.
Technical Parameters
| Model: OBV5-C40-PV |
| Network voltage |
500Vdc |
600Vdc |
800Vdc |
900Vdc |
1000 Vdc |
|
| Max. operating voltage Uc |
530Vdc |
630Vdc |
840Vdc |
950Vdc |
1060 Vdc |
|
| Nominal discharge current ln |
20kA |
| Max. discharge current lmax |
40kA |
| Protection level (at In) Up |
1.8kV |
2.5kV |
2.8kV |
3.0kV |
3.2kV |
|
| Disconnector |
| Thermal Disconnector |
Internal |
| Mechanical characteristics |
| Connection |
by screw terminals: 4-25 mm2 |
| Disconnection indicator |
1 mechanical indicator by pole |
| Mounting |
symmetrical rail 35 mm |
| Operating temperature |
-40/+85°C |
| Protection class |
IP20 |
| Standards compliance |
| NF EN 61643-11 France |
Parafoudre Basse Tension - Essais Classe II |
| IEC 61643-1 International |
Low Voltage SPD - Test Class II |
| EN 61643-11 Europe |
Parafoudre Basse Tension - Essais Classe II |
Feature&Benefits
-Easy installation or retrofit
-Din-rail mountable
-Fail-safe /self-protected designRemote indicator (optional) with 3pin NO/NC contact
-IP20 finger-safe designVisual indicator
-Small foot print
Application
●AC/DC distribution
●Power supplies
●Industrial automation
●Telecommunications
●Motor controls systems
●PLC applications
●Power transfer equipment
●HVAC applications
● AC drives
●UPS systems
●Security systems
●IT/Data centers
Others
Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):
| Type No. |
Rated Voltage(V) Un |
Continuous Voltage Uc(V~) |
Standard Discharge Current In(KA) |
Max Discharge Current
Imax(KA)
|
Protection Level(KA~) |
Response Time(ns) |
| DGM1(2)-D5 |
220/380 |
275/320
385/420
|
5 |
10 |
1.2 |
≤25 |
| DGM1(2)-D10 |
10 |
2 |
1.6 |
| DGM1(2)-C20 |
20 |
40 |
1.8 |
| DGM13-B30 |
30 |
60 |
.2.2 |
| DGM3(4)-B40 |
10 |
80 |
2.4 |
| DGM(4)-B60 |
60 |
100 |
2.8 |
| DGM-N-PE |
220/255 |
40/60 |
60/80 |
1.2 |
≤100 |
Tip1:How can we distinguish the quality of the lightning arrester?
1. It can be seen from the reaction time: determine whether the lightning arrester can respond in time and quickly discharge the lightning current.
2. It can be seen from the insertion loss: this refers to the installation of a lightning protector, the impact of this lightning protector on the line, the smaller the better
3. It can be seen from the number of impact resistance: determines the service life of the lightning arrester. Generally, the gas discharge tube will not drop after being placed for a period of time. If you want to check its quality, you can use an adjustable high-voltage DC power supply to test .
Tip2.What skills should lightning protectors have in the selection?
1.Confirm power supply system
First of all, you must determine what your power distribution system is like, whether it is TT, TN or IT system. After determining the power distribution system, you can choose the protection mode and wiring method of the lightning arrester to select the appropriate lightning arrester.
For example, TN-C uses 3P lightning protection device, TN-S uses 4P, TT uses 3P+N, etc.
2.Know the main parameters of the lightning arrester.
Our Services & Strength
1. We provide the high quality, strong and sturdy products.
2. Products have passed ISO9001 international certification and meet the international standard.
3. Strict inspection before leaving the factory.
4. Products are easy to carry since the small volume and light weight.
Leading technology to provide customized products for customers.
5. On time delivery.
6. We provide free design and support OEM&ODM.
7. We could provide free sample.
8. A wide variety of products.
9.The materials of products are selected carefully and exquisite workmanship.
10. No smell and no fading.
FAQ
Q: Can I get some samples?
A: Yes, Sample orders welcomed.
Q: Can I use my own Logo or design on goods?
A: Yes, Customized logo and design on mass production are available.
Q:What is the delivery time?
A: 3 days for samples, 7-15 days for mass production.
Q: What is the payment term?
A: T/T, L/C at sight, West union , Paypal, etc.
Product Tags:
|
|
Network Voltage 900VDC PV Surge Protector 2 Poles For Solar Panel Images
|
